Kennesaw & surrounding Cobb County · 24/7 Emergency Response
Open 24/7 · (770) 214-4545

Top Services

Water Heater Installation & ReplacementTankless Water Heater ServiceDrain Cleaning & Unclogging All Services →

Areas We Serve

Acworth, GAMarietta, GAWoodstock, GAPowder Springs, GASmyrna, GAMableton, GA

More

Blog Contact ☎ Call (770) 214-4545
Sump Pump Repair & Installation in Kennesaw, GA
Sump Pump Repair & Installation

Emergency Sump Pump Repair & Installation,
Kennesaw GA

Same-day sump pump repair, new installs, and battery backup systems.

24/7 Emergency Line Open

24/7 Emergency Line Open

(770) 214-4545
  • Same-DayRepair Calls
  • BatteryBackup Available

Licensed plumbers on call 24/7. Flat price before work starts.

A sump pump that won't turn on, runs constantly without shutting off, or has never been installed in a basement that clearly needs one are all common calls, and getting the right pump size and setup matters more than most homeowners expect.

If Your Sump Pump Stopped And Water Is Rising

A pump that quits during a storm leaves little time. These steps buy it while a technician is on the way.

  1. Check that the pump is plugged in and that the GFCI outlet and breaker have not tripped.
  2. Lower the water level with buckets or a wet vac if it is safe to stand where you are.
  3. Keep clear of standing water near outlets, panels and appliances.
  4. Call (770) 214-4545 and tell the dispatcher if the pump hums, runs without moving water, or does nothing at all.

When A Sump Pump Failure Is An Emergency

A pump that will not start while water rises, one that runs nonstop without discharging, and a pump that lost power during a storm with no backup are all urgent. Standing water in an electrical room or near a furnace makes it more so.

Storm days bring heavy call volume, so the dispatcher confirms timing when you call. A battery backup installed afterward keeps the next outage from becoming the next emergency.

A pump that's the wrong size for the job tends to fail early, which makes correct sizing during installation just as important as fixing whatever caused today's call.

Why Sump Pumps Fail

A float switch that's stuck, either from debris in the pit or from age-related wear, is the most common reason a pump won't activate when water rises. A pump that runs constantly, on the other hand, usually means a failed check valve is letting water flow back down into the pit after each cycle, forcing the pump to immediately restart.

Sump Pump Repair Or Replacement: How The Call Gets Decided

Most sump pump repair calls are decided by age and by what failed. A float switch, a check valve, or a clogged discharge line is a quick, inexpensive fix on a pump that is otherwise healthy, while a seized motor or a corroded housing on a unit that has run for ten years or more is usually better replaced than rebuilt.

A technician tests the pump in the pit before touching anything, running water in to confirm that it starts, empties the pit, and shuts off cleanly. That test separates a pump that needs one part from one that is simply worn out, and it avoids paying for a repair on equipment that will fail again in the next storm.

What We Check On A Sump Pump Repair Call

The usual checklist covers the float switch, the check valve, the discharge line and its outlet, the power supply and GFCI outlet, and the pit itself. Silt, gravel, and debris in the pit are a common hidden cause of a stuck float, and a discharge pipe that empties too close to the foundation sends the same water right back to the pit.

If a pump hums without moving water, the impeller is often jammed, which is a fixable problem when it is caught early. A pump that trips the breaker or the GFCI outlet repeatedly points to a motor or wiring fault that should not be reset and ignored.

Sizing And Battery Backup

An undersized pump for the amount of water a given basement or crawl space actually takes on will run constantly and burn out early, while an oversized pump cycles on and off too rapidly, which also shortens its life. A battery backup system matters because heavy storms that cause basement flooding often knock out power at the same time, which is exactly when a standard pump stops working.

Primary Pump vs. Backup Systems

A primary sump pump runs off standard household electrical power and handles the day-to-day workload. A backup system, whether battery-powered or water-powered using municipal water pressure, only activates if the primary pump fails or loses power, providing a second layer of protection during exactly the storm conditions when failure risk is highest.

Why Kennesaw Basements And Crawl Spaces Need This

Homes on Kennesaw's slab foundations with a crawl space, and the smaller number with a full basement, both sit on red clay that drains slowly after storms, keeping groundwater pressure elevated for longer than a faster-draining soil type would. That extended pressure window is exactly when an undersized or backup-less sump pump is most likely to fail right when it's needed most.

A repair visit typically takes under an hour once the cause is identified, and a new installation, including setting the pit if one doesn't already exist, is usually completed in half a day.

Sump Pumps In Mountain-Side And Creek-Side Basements

Basements and crawl spaces closest to Kennesaw Mountain and the Noonday Creek corridor take on the most groundwater, and sump pump repair calls rise right after the first big storm of the season. Homes in Pine Mountain Acres and The Landings at Kennesaw Mountain often need the discharge line checked as carefully as the pump, since water that returns to the pit makes the pump work twice as hard.

What Sump Pump Work Costs In Kennesaw

Pump Repair (switch/valve)$150-$400
New Pump Installation$600-$1,200
Battery Backup System$800-$1,800

Pricing depends on pump horsepower and whether an existing pit and discharge line can be reused. Want your real number? Call (770) 214-4545.

Pump not turning on or running nonstop?

☎ (770) 214-4545

Before You Call

  • Check that the pump is actually plugged in and the outlet or breaker has power, which is easy to overlook in a stressful moment.
  • Look for debris, sediment, or a stuck float switch inside the pit that might be preventing normal operation.
  • Note whether the pump runs constantly, cycles rapidly, or does not run at all, since each pattern points toward a different specific cause.

A sump pump that's part of a bigger basement moisture problem, not just an isolated pump failure, should see the basement waterproofing page for a full system. Basements that have already flooded and need cleanup should see water damage restoration. Marietta's older neighborhoods on the slopes that run toward Kennesaw Mountain show this storm-driven runoff pattern most clearly.

Ejector Pumps And Sewage Basins

A sump pump moves groundwater, while an ejector pump moves wastewater from a bathroom or laundry that sits below the sewer line. They look similar from the outside but use different pumps, covers and piping.

A sewage basin must be sealed and vented, and its pump is built to pass solids. If a below-grade bathroom backs up or a pump alarm sounds, call and mention that it is a sewage pump.

Frequently Asked Questions

How long do sump pumps typically last?
Most sump pumps last 7 to 10 years with normal use, though a pump running constantly due to an undersized fit will fail much sooner.
Do I need a battery backup if I already have a sump pump?
It's strongly recommended, since power outages during major storms are exactly when basement flooding risk is highest and a standard pump needs power to run.
Why does my sump pump run even when it's not raining?
A failed check valve letting water flow back into the pit, or a high water table in the area, can both cause a pump to cycle even without recent rain.
What horsepower sump pump do I actually need?
Most residential applications use a 1/3 to 1/2 HP pump, but the right size depends on the pit's water inflow rate, which a technician measures rather than assumes.
How often should a sump pump be tested?
Pouring a bucket of water into the pit to confirm the float switch activates the pump is a simple test worth doing every few months, especially before storm season.
Will a sump pump alone keep a basement completely dry?
A pump alone handles water that's already collected in the pit. A full interior drainage system captures water before it spreads across the floor for more complete protection.
Do you replace sump pumps in an emergency during a storm?
Yes. Emergency repair and replacement go through the 24/7 line, and storm volume may stretch the wait. The dispatcher gives you a realistic window when you call.
Kennesaw Apex 24/7☎ (770) 214-4545
☎